Menu
Search
Search
  1. Home
  2. Restaurant Equipment
  3. Dish Washing Equipment
  4. Grease Traps
  5. Oil Interceptors
  6. Zurn Z1186 Oil Interceptor
  7. Zurn Z1186-300 10 GPM Oil Interceptor
Zurn Z1186-300 10 GPM Oil Interceptor
Zurn Z1186-300 10 GPM Oil Interceptor

Zurn Z1186-300 10 GPM Oil Interceptor 

These oil interceptors feature fabricated steel construction with an acid resistant epoxy coat on the interior and exterior, bronze cleanout plug, visible double wall trap seal, removable combination pressure equalizing/flow diffusing baffle and sediment bucket, horizontal baffle, adjustable oil draw-off and vent connections either side, secured gasketed non-skid cover complete with flow control fitting and a threaded inlet and outlet.
Note: Location of outlet from bottom of interceptor cannot be changed.
This Zurn oil interceptor Z1186 is furnished with a 1-1/2" NPT adjustable oil draw-off assembly. Since oils are lighter than water, gravity causes the oil to rise to the surface of the water. The oil draw-off assembly allows the separated oils, and other similar light density substances, to be automatically drained out through a properly adjusted internal stand pipe. A pipe connection from the internal adjustable standpipe is connected to an oil drain line leading from the oil interceptor to an oil storage tank. The standpipe sleeve (brass tube) must be adjusted so the opening is 1/8" above the top of the normal water flow level in the interceptor chamber. The oil that floats to the surface will drain off by gravity flow as waste water flows through the interceptor. When the adjustable sleeve in the standpipe is correctly set, no water will drain off with the oil. There is no need for any manual skimming of the oil.

Dimensions:

Zurn Oil Interceptor Z1186-300 Oil Interceptor Heavy Duty Commercial

  • 7 Gal Water Capacity 10 GPM
  • Outlet Pipe Size 2"
  • Width   Front to Back 14"
  • Length Side to Side (Inlet to Oulet)  25-1/8"
  • Height Floor to top    13-5/8"
  • Bottom to Center of Inlet  8-1/8"
  • 56 Lbs

Made in USA

 
 

 

Spec Sheet

Zurn Z1186-300 10 GPM Oil Interceptor

Part Number: Z1186-300
0 Review(s) Write a Review
On sale: $8,015.00 $1,678.97
Warning : Attention California Residents - Prop 65 Warning

Related Items

Zurn Z1186-400 15 GPM Oil Interceptor
(0)
Zurn Z1186-400 15 GPM Oil Interceptor
$10,994.00 $2,098.97 Sale
Add To Cart
Zurn Z1186-500 20 GPM Oil Interceptor
(0)
Zurn Z1186-500 20 GPM Oil Interceptor
$13,288.00 $2,361.97 Sale
Add To Cart
Zurn Z1186-600 25 GPM Oil Interceptor
(0)
Zurn Z1186-600 25 GPM Oil Interceptor
$14,433.00 $2,571.97 Sale
Add To Cart
Zurn Z1186-800 50 GPM Oil Interceptor
(0)
Zurn Z1186-800 50 GPM Oil Interceptor
$23,596.00 $3,883.97 Sale
Add To Cart
Zurn Z1186-700 35 GPM Oil Interceptor
(0)
Zurn Z1186-700 35 GPM Oil Interceptor
$17,544.00 $2,949.97 Sale
Add To Cart
TOP
0 Items