Atosa USA SWS1272/304 Wall Mount Shelf, 72"W x 12"D, 304 Stainless Steel, 18 Gauge, 3 Brackets, NSF
Atosa USA SWS1272/304 — 72" x 12" Wall Mount Shelf in 304 Stainless Steel
Six feet of overhead storage, and the first size in Atosa's SWS line to get three support brackets instead of two. Built from 18-gauge 304 stainless steel and rated for 285 lb evenly distributed, it runs the full length of a standard six-foot work table or dish landing without a joint in the middle.
Key Features of the SWS1272/304
Six feet is the length where a two-bracket shelf starts to give. These are the specifications that keep this one flat and corrosion-free.
Three Brackets, Not Two
The 72" model is where Atosa steps the SWS line up to three brackets. That center support is what turns six feet of stainless from a shelf that dips into one that stays flat under load.
304 Stainless, Not 430
The /304 suffix identifies the alloy. Nickel-bearing 304 resists pitting from salt, acidic food residue and chlorinated sanitizers far better than the 430 used on economy-grade shelving.
18-Gauge Deck
An 18-gauge surface is substantially stiffer than the 20- and 22-gauge decks common at this price point — the difference between a flat shelf and a visible dip across a six-foot run.
285 lb Rated Capacity
Rated for 285 lb evenly distributed across the deck on three brackets — room for a full six-foot run of stacked hotel pans, cambros or plated china.
NSF Listed
Built to NSF sanitation standards with smooth surfaces and no open seams to trap debris — what health inspectors expect on shelving hung over prep and warewashing areas.
10" Vertical Clearance
The bracket geometry sets the deck 10 inches off the mounting line, leaving usable wall space underneath for sixth pans, bottle racks and small containers.
Mounting note: wall anchors are not supplied, since the correct fastener depends entirely on the wall. Get all three brackets into structure — a center bracket landing in drywall between studs carries nothing. Use hardware rated for the substrate and the full 285 lb load.
Ideal Applications
Seventy-two inches matches a standard six-foot work table or dish table — one shelf instead of two with a seam.
SWS1272/304 Specifications
| Model | SWS1272/304 |
|---|---|
| Brand | Atosa USA |
| Type | Wall mounted shelf |
| Overall Dimensions (W x D x H) | 72" x 12" x 10" |
| Material | 304 stainless steel |
| Gauge | 18 gauge |
| Support Brackets | 3 included |
| Load Capacity | 285 lb, evenly distributed |
| Net Weight | 15.65 lb |
| Gross Weight | 22.48 lb |
| Sanitation | NSF listed |
| Warranty | 90 day workmanship warranty |
Frequently Asked Questions
Why does this shelf have three brackets?
72" is the width at which Atosa steps the SWS line from two brackets to three. At six feet, a center support is what keeps the deck flat under a distributed load rather than bowing between two end brackets.
What does the /304 in the model number mean?
It identifies the stainless alloy. The SWS1272/304 is 304 stainless steel rather than the 430 used on Atosa's standard-grade wall shelves. 304 contains nickel, which makes it noticeably more resistant to pitting and staining from salt, acidic foods and chlorine sanitizers.
How much weight will a 72-inch shelf hold?
Atosa rates the 72" x 12" shelf at 285 pounds evenly distributed across the deck on its three brackets. Concentrating that load at one point, or mounting into a wall that cannot carry it, reduces the safe working limit.
Are mounting screws or wall anchors included?
No. The three brackets are supplied but fasteners are left to the installer, because the right anchor depends on whether you are mounting into wood studs, metal studs, concrete block or a reinforced panel.
Is the SWS1272/304 NSF listed?
Yes. It is NSF listed for commercial foodservice use, which is what most health departments require for shelving above prep and warewashing areas.
What other sizes are available in this series?
The SWS wall shelf line runs 24", 30", 36", 48", 60", 72", 84", 96", 108" and 120" wide, in 12", 15" and 18" depths. Everything below 72" ships with two brackets.
| Brand | Atosa USA |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
![[Price Match Guarantee] Price Match Guarantee](/web/image/dr.website.content/5/image/%5BPrice%20Match%20Guarantee%5D%20Price%20Match%20Guarantee?unique=3dc2115){kind=small}
| SKU | SWS1272/304 |
| Brand | Atosa USA |
| Weight | 21.00 lbs |
| Dimensions (HxWxD) | 10.00 x 72.00 x 12.00 inches |
| Height | 10.00 |
| Width | 72.00 |
| Depth | 12.00 |
| Type | 400 series |
| Width (side - side) | 72" |
| Gauge | 18 gauge |
| Depth (front - back) | 12" |
| Construction | stainless steel |
|
Resources
