Blue Air BLMT48-D2R-HC 48" Mega Top Sandwich & Salad Prep Table with 1 Door & 2 Right-Side Drawers

D2R identifies the two-drawer configuration with the drawers on the right; Blue Air's product data lists the single self-closing door on the left. So looking at the front of the BLMT48-D2R-HC, you get a shelved door section on your left and a stack of two 6" pan drawers on your right. Check that against your line before ordering, because the door needs swing room on the left-hand side.

Both tables are the same 48-3/8" two-section chassis with 13.1 cu. ft. and the same 18-pan mega top. The all-drawer BLMT48-D4-HC gives you four drawers and no shelved space at all; the BLMT48-D2R-HC trades two of those drawers for a door section with two wire shelves. If your prep is entirely portioned into pans, take the four drawers — if you also receive cases, gallon jugs or tall tubs that will not lie flat in a 6" pan, this split base is the one that stores them cold.

Two epoxy coated wire shelves, which is the standard shelving for this cabinet and enough to split the section into three usable levels including the floor. The epoxy coating resists the corrosion that comes with wet produce and frequent washdown. Blue Air lists additional shelves as an available option if you want to divide the section further.

Yes. Eighteen 1/6 size pans ship with the table, filling the rail's six positions across in three rows, so the top is usable the day it is uncrated with no separate pan order. An insulated pan cover with a stainless steel divider is included to close the rail during slow periods and overnight, and the 9-1/2" cutting board with its side rail bracket comes standard too.

More than the cabinet dimensions suggest. The published 33-11/64" depth does not include 2-3/8" for the cutting board overhang or 2-7/32" for the rear spacers, and the 39-11/64" height does not include the 5" (127 mm) casters. Width appears as 48-3/8" in Blue Air's product data and 48-7/16" (1231 mm) in the cutsheet dimension table — a 1/16" difference, but plan around the larger number in a tight equipment run.

A standard 115 V, 60 Hz single-phase receptacle. The 1/4 HP rear-mounted R-290 system draws 4.7 amps and plugs in through a NEMA 5-15P molded plug on a 9.8 ft (3 m) three-wire cord, so no dedicated circuit or hard-wiring is required. Net weight is 254 lbs (115 kg) and it ships at 315 lbs (143 kg), light enough for a two-person uncrate, and it rolls on four 4" swivel casters with the front two braked.