Canplas Endura 3907A02T 7 GPM 14 lb Compact Grease Trap Interceptor with 2" Threaded Connections
Canplas Endura 3907A02T — 7 GPM / 14 lb Compact Grease Interceptor with 2" Threaded Connections
The Canplas Endura 3907A02T is the threaded-connection version of the smallest Endura hydromechanical grease interceptor, sized for a single 2" fixture drain piped with threaded fittings. Its inlet and outlet use female NPT polypropylene end connectors, and a threaded format flow control device with integrated air intake is included. The compact one-piece polypropylene tank is rated at 7 GPM and 14 lb, yet tested to 31.9 lb of grease capacity at 95.5% efficiency per ASME A112.14.3. It holds 12.96 gallons in a 14.5" x 17.5" x 16.3" footprint and weighs only 15.8 lb empty.
Key Features of the 3907A02T
The 3907A02T shares its compact tank, lid and baffles with the hub-connection 3907A02; factory female NPT ends and the threaded flow control in the box let it thread directly onto 2" threaded drain piping.
2" Female NPT End Connectors
Polypropylene female NPT threaded ends on the inlet and outlet replace the mechanical-joint hubs of the 3907A02 and the IPS spigots of the 3907A02S; the threaded configuration is offered for the USA market.
Threaded Format Flow Control Included
An external threaded format flow control device with integrated air intake ships with the unit, limiting incoming flow to 7 GPM and adding the air the separation process needs.
31.9 lb Tested Grease Capacity
Rated at 14 lb, the tank held 31.9 lb of grease in ASME A112.14.3 testing at 95.5% average efficiency — more than double its rating — with 12.96 gallons (49 L) of liquid capacity.
15.8 lb Corrosion-Proof Tank
Tank, lid and baffles are injection molded in high-impact engineered polypropylene that will not corrode, chip or peel; at 15.8 lb empty the unit is easy to carry and set by one person.
220°F Continuous Discharge Rating
The polypropylene body is rated for a maximum service temperature of 220°F (104°C) continuous discharge, so hot sink water does not soften or warp it.
Odor-Sealed Latching Cover
A recessed silicone seal keeps odors in and quick-access latches open the lid by hand; the cover exceeds CSA B481.0 Class L with a 600 lb minimum proof load and 300 lb service load.
Installation note: The interceptor must be vented in accordance with local code and isolated from the drainage system during any final drain or pressure test — never pressure test the tank. Riser extensions are offered only for the 15 GPM and larger Endura tanks, so plan the 7/10 GPM tank for on-floor, semi-recessed or shallow in-floor placement with the lid accessible. Confirm connection type and flow control requirements with the local plumbing authority and have the unit installed by a licensed plumber.
Ideal Applications
A 7 GPM, 2" interceptor is sized for one low-flow fixture where space under the counter is tight.
3907A02T Specifications
| Model | Canplas Endura 3907A02T (product code 763105) |
|---|---|
| Type | Hydromechanical grease interceptor, compact |
| Rated Flow | 7 GPM (0.44 L/s) |
| Rated Grease Capacity | 14 lb |
| Actual Grease Capacity | 31.9 lb per ASME A112.14.3 |
| Average Efficiency | 95.5% per ASME A112.14.3 |
| Liquid Capacity | 12.96 gal (49 L) |
| Connection | 2" female NPT threaded, polypropylene end connectors |
| Flow Control | Threaded format external flow control device with integrated air intake, included |
| Dimensions | 14.5" x 17.5" x 16.3" H |
| Empty Weight | 15.8 lb (7.2 kg) |
| Shipping Weight | 19 lb |
| Material | High-impact polypropylene tank, lid and internal components |
| Max Service Temperature | 220°F (104°C) continuous discharge |
| Cover Rating | Exceeds CSA B481.0 Class L; 600 lb proof load, 300 lb service load |
| Installation | On-floor, semi-recessed or in-floor |
| Riser Extension | Not available for the 7/10 GPM tank |
| Standards | Efficiency rated to ASME A112.14.3; designed to PDI G-101; 3907A series accepted under NYC MEA 160-08-E |
| Warranty | Limited lifetime (registration within 90 days of purchase) |
Optional Accessories & Service Parts
These Endura service parts fit the 7/10 GPM compact tank used by the 3907A02T.
Frequently Asked Questions
What is the difference between the Endura 3907A02T and the 3907A02?
Both use the same 7 GPM, 14 lb compact tank with 2-inch connections. The 3907A02 has no-hub mechanical joint connections, while the 3907A02T has female NPT threaded polypropylene end connectors and ships with a threaded format flow control device. The 3907A02S version has IPS spigot connections.
Is a flow control device included with the 3907A02T?
Yes. The 3907A02T is supplied with a threaded format external flow control device with integrated air intake, which limits incoming flow to the 7 GPM rating.
How much grease does the 3907A02T hold?
It is rated at 14 lb and tested to 31.9 lb of grease capacity at 95.5% average efficiency per ASME A112.14.3. Liquid capacity is 12.96 gallons.
How big is the 3907A02T?
The compact tank measures 14.5 by 17.5 inches and stands 16.3 inches high, so it fits inside most sink base cabinets.
Can I add a riser to the 3907A02T?
No. Endura riser extensions are offered for the 15 GPM and larger tanks; the 7/10 GPM tank is installed on-floor, semi-recessed or in-floor with the lid accessible.
What does the 3907A02T weigh?
The interceptor weighs 15.8 lb empty and ships at about 19 lb.
| Brand | Canplas |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
| SKU | 3907A02T |
| Brand | Canplas |
| Weight | 19.00 lbs |
| Dimensions (HxWxD) | 16.30 x 14.50 x 17.50 inches |
| Height | 16.30 |
| Width | 14.50 |
| Depth | 17.50 |
|
|

