Canplas Endura 3920A02S 20 GPM 40 lb Grease Trap Interceptor with 2" Spigot Connections
Canplas Endura 3920A02S — 20 GPM / 40 lb Grease Interceptor with 2" Spigot Connections
The Canplas Endura 3920A02S is the spigot-connection version of the Endura 20 GPM hydromechanical grease interceptor, built for 2" drain lines and jurisdictions that call for IPS spigot polypropylene end connectors instead of no-hub couplings. The one-piece injection-molded polypropylene tank is rated at 20 GPM and 40 lb, and in ASME A112.14.3 testing it held 76.4 lb of grease — nearly double its rating. A spigot format flow control device with integrated air intake is included, the tank weighs only 23 lb empty, and its compact 23.6" x 17.5" x 16.3" body fits under most sinks or recesses into the floor.
Key Features of the 3920A02S
The 3920A02S shares its tank, lid and baffles with the hub-connection 3920A02; the factory spigot ends and the spigot flow control in the box let it solvent-weld into a 2" spigot-specified drain.
2" IPS Spigot End Connectors
Polypropylene IPS spigot ends on the inlet and outlet replace the mechanical-joint hubs of the 3920A02 and the female NPT threads of the 3920A02T, matching plans that specify a 2" spigot connection.
Spigot Format Flow Control Included
An external spigot format flow control device with integrated air intake ships with the unit, limiting incoming flow to 20 GPM and adding the air the separation process needs.
76.4 lb Tested Grease Capacity
Rated at 40 lb, the tank held 76.4 lb (34.65 kg) of grease under ASME A112.14.3 testing at 91.3% average efficiency, with 21.6 gallons of liquid capacity.
23 lb Corrosion-Proof Tank
Tank, lid and baffles are injection molded in high-impact engineered polypropylene that will not corrode, chip or peel, and the whole unit weighs just 23 lb empty for one-person installation.
220°F Continuous Discharge Rating
The polypropylene body is rated for a maximum service temperature of 220°F (104°C) continuous discharge, so hot sink and dishwasher water does not soften or warp it.
Odor-Sealed Latching Cover
A recessed silicone seal keeps odors in and quick-access latches open the lid by hand; the cover exceeds CSA B481.0 Class L with a 600 lb minimum proof load and 300 lb service load.
Installation note: The interceptor must be vented in accordance with local code and isolated from the drainage system during any final drain or pressure test — never pressure test the tank. For below-grade installations, 3920AX6 riser extensions bring the 15/20 GPM tank up to grade by a maximum of 18". Confirm connection type and flow control requirements with the local plumbing authority and have the unit installed by a licensed plumber.
Ideal Applications
A 20 GPM, 2" interceptor is the workhorse size for single-fixture point-of-use grease control in small and mid-size kitchens.
3920A02S Specifications
| Model | Canplas Endura 3920A02S (product code 763133) |
|---|---|
| Type | Hydromechanical grease interceptor |
| Rated Flow | 20 GPM (1.26 L/s) |
| Rated Grease Capacity | 40 lb |
| Actual Grease Capacity | 76.4 lb (34.65 kg) per ASME A112.14.3 |
| Average Efficiency | 91.3% per ASME A112.14.3 |
| Liquid Capacity | 21.6 gal (81.8 L) |
| Connection | 2" IPS spigot, polypropylene end connectors |
| Flow Control | Spigot format external flow control device with integrated air intake, included |
| Dimensions | 23.6" L x 17.5" W x 16.3" H |
| Empty Weight | 23 lb (10.4 kg) |
| Shipping Weight | 25 lb |
| Material | High-impact polypropylene tank, lid and internal components |
| Max Service Temperature | 220°F (104°C) continuous discharge |
| Cover Rating | Exceeds CSA B481.0 Class L; 600 lb proof load, 300 lb service load |
| Installation | In-floor, on-floor or semi-recessed |
| Riser Extension | 3920AX6, up to 18" to grade |
| Standards | Efficiency rated to ASME A112.14.3; designed to PDI G-101; 3920A series accepted under NYC MEA 160-08-E |
| Warranty | Limited lifetime (registration within 90 days of purchase) |
Optional Accessories & Service Parts
These Endura parts fit the 15/20 GPM tank used by the 3920A02S.
Frequently Asked Questions
What is the difference between the Endura 3920A02S and the 3920A02?
Both use the same 20 GPM, 40 lb tank with 2-inch connections. The 3920A02 has no-hub mechanical joint connections, while the 3920A02S has IPS spigot polypropylene end connectors and ships with a spigot format flow control device. The 3920A02T version has female NPT threaded connections.
Is a flow control device included with the 3920A02S?
Yes. The 3920A02S is supplied with a spigot format external flow control device with integrated air intake, which limits incoming flow to the 20 GPM rating.
How much grease does the 3920A02S hold?
It is rated at 40 lb, and in ASME A112.14.3 testing it held 76.4 lb (34.65 kg) of grease at 91.3% average efficiency. Liquid capacity is 21.6 gallons.
Will the 3920A02S fit under a sink?
In most cases, yes. The tank is 23.6 inches long, 17.5 inches wide and 16.3 inches high, so it fits beneath many pot and prep sinks; it can also be installed in-floor or semi-recessed.
Can the 3920A02S be installed below the floor?
Yes. 3920AX6 riser extensions bring a below-grade 15/20 GPM tank up to grade by a maximum of 18 inches.
What does the 3920A02S weigh?
The interceptor weighs 23 lb empty and ships at about 25 lb.
| Brand | Canplas |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
| SKU | 3920A02S |
| Brand | Canplas |
| Weight | 25.00 lbs |
| Dimensions (HxWxD) | 16.30 x 23.60 x 17.50 inches |
| Height | 16.30 |
| Width | 23.60 |
| Depth | 17.50 |
|
|

