Canplas Endura 3935A04T 35 GPM 70 lb Grease Trap Interceptor with 4" Threaded Connections
Canplas Endura 3935A04T — 35 GPM / 70 lb Grease Interceptor with 4" Threaded Connections
The Canplas Endura 3935A04T is the threaded-connection version of the Endura 35 GPM hydromechanical grease interceptor, made for US installations that call for 4" female NPT threaded polypropylene end connectors rather than no-hub couplings. The one-piece injection-molded polypropylene tank is rated at 35 GPM and 70 lb, and in ASME A112.14.3 testing it retained 138.5 lb of grease at 98.6% average efficiency — the highest efficiency in the 7–50 GPM Endura line. A threaded format external flow control device with integrated air intake is included, the tank weighs only 45 lb empty, and it installs in-floor, on-floor or semi-recessed in a 31" x 23.5" footprint.
Key Features of the 3935A04T
The 3935A04T uses the same tank, lid and baffles as the hub-connection 3935A04; the difference is the factory threaded end connectors and the matching threaded flow control, so the unit screws directly onto threaded drain piping.
4" Female NPT Threaded Ends
Polypropylene female NPT end connectors on the inlet and outlet replace the mechanical-joint hubs of the 3935A04 and the IPS spigots of the 3935A04S; the threaded format is offered for US installations only.
Threaded Flow Control Included
A threaded format external flow control device with integrated air intake ships with the interceptor, holding incoming flow to the 35 GPM rating so the tank separates grease at its tested efficiency.
138.5 lb Tested Grease Capacity
Rated at 70 lb, the tank held 138.5 lb (62.8 kg) of grease under ASME A112.14.3 testing, with 39.4 gallons of liquid capacity — nearly double the rating stored between pump-outs.
Corrosion-Proof Polypropylene
Tank, lid and baffles are injection molded in high-impact engineered polypropylene that will not corrode, chip or peel, and the whole unit weighs just 45 lb empty for one-person handling.
220°F Continuous Discharge Rating
The tank is rated for a maximum service temperature of 220°F (104°C) continuous discharge, so hot pot sink and dishwasher water does not soften or warp the body.
Odor-Sealed Latching Cover
A recessed silicone seal keeps odors in, quick-access latches open the lid by hand, and the cover exceeds CSA B481.0 Class L with a 600 lb minimum proof load and 300 lb service load.
Installation note: Do not over-tighten threaded fittings into the polypropylene end connectors, vent the interceptor in accordance with local code, and isolate it from the drainage system during any final drain or pressure test — never pressure test the tank. For below-grade installations, 3935AX6 riser extensions bring the 35 GPM tank up to grade by a maximum of 18". Installation by a licensed plumber is required.
Ideal Applications
A 35 GPM, 4" interceptor covers a single large fixture group in most commercial kitchens, and the threaded version suits drain lines built with threaded pipe and fittings.
3935A04T Specifications
| Model | Canplas Endura 3935A04T (product code 763551) |
|---|---|
| Type | Hydromechanical grease interceptor |
| Rated Flow | 35 GPM (2.2 L/s) |
| Rated Grease Capacity | 70 lb |
| Actual Grease Capacity | 138.5 lb (62.8 kg) per ASME A112.14.3 |
| Average Efficiency | 98.6% per ASME A112.14.3 |
| Liquid Capacity | 39.4 gal (149.1 L) |
| Connection | 4" female NPT threaded, polypropylene end connectors (USA only) |
| Flow Control | Threaded format external flow control device with integrated air intake, included |
| Dimensions | 31" L x 23.5" W x 17.5" H |
| Empty Weight | 45 lb (20.4 kg) |
| Shipping Weight | 57 lb |
| Material | High-impact polypropylene tank, lid and internal components |
| Max Service Temperature | 220°F (104°C) continuous discharge |
| Cover Rating | Exceeds CSA B481.0 Class L; 600 lb proof load, 300 lb service load |
| Installation | In-floor, on-floor or semi-recessed |
| Riser Extension | 3935AX6, up to 18" to grade |
| Standards | Efficiency rated to ASME A112.14.3; designed to PDI G-101; 3935A series accepted under NYC MEA 160-08-E |
| Warranty | Limited lifetime (registration within 90 days of purchase) |
Optional Accessories & Service Parts
These Endura parts fit the 35 GPM tank used by the 3935A04T.
Frequently Asked Questions
What is the difference between the Endura 3935A04T and the 3935A04?
Both use the same 35 GPM, 70 lb tank. The 3935A04 has 4-inch no-hub mechanical joint connections, while the 3935A04T has 4-inch female NPT threaded polypropylene end connectors and ships with a threaded format flow control device. The 3935A04S version has IPS spigot connections.
Is a flow control device included with the 3935A04T?
Yes. The 3935A04T is supplied with a threaded format external flow control device with integrated air intake, which limits incoming flow to the 35 GPM rating.
How much grease does the 3935A04T hold?
It is rated at 70 lb, and in ASME A112.14.3 testing it retained 138.5 lb (62.8 kg) of grease at 98.6% average efficiency. Liquid capacity is 39.4 gallons.
Can the 3935A04T be installed below the floor?
Yes. It can be installed in-floor, on-floor or semi-recessed. For below-grade installations, 3935AX6 riser extensions bring the tank up to grade by a maximum of 18 inches.
Is the 3935A04T available outside the United States?
The female NPT threaded connection format is offered for US installations only; Canadian installations use the hub or spigot versions.
What are the dimensions and weight of the 3935A04T?
The interceptor measures 31 inches long, 23.5 inches wide and 17.5 inches high, weighs 45 lb empty and ships at about 57 lb.
| Brand | Canplas |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
| SKU | 3935A04T |
| Brand | Canplas |
| Weight | 57.00 lbs |
| Dimensions (HxWxD) | 17.50 x 31.00 x 23.50 inches |
| Height | 17.50 |
| Width | 31.00 |
| Depth | 23.50 |
|
|

