Canplas Endura 3950A04S 50 GPM 100 lb Grease Trap Interceptor with 4" Spigot Connections
Canplas Endura 3950A04S — 50 GPM / 100 lb Grease Interceptor with 4" Spigot Connections
The Canplas Endura 3950A04S is the 4-inch spigot version of the Endura 50 GPM hydromechanical grease interceptor — the largest tank in the 7–50 GPM Endura line. Built for drains that call for 4" IPS spigot polypropylene end connectors, the one-piece injection-molded tank is rated at 50 GPM and 100 lb, holds 52 gallons of liquid and carries a grease capacity of 122.07 lb at 93.9% average efficiency per ASME A112.14.3. It ships with a spigot format flow control device (spigot x spigot x spigot) with integrated air intake, weighs 60 lb empty, and shares the 31" x 23.5" footprint of the 35 GPM model in a taller 23.5" body.
Key Features of the 3950A04S
The 3950A04S uses the same tall 50 GPM tank, lid and baffle set as the hub-connection 3950A04; the spigot end format and the spigot flow control in the box let it solvent-weld into a 4" spigot-specified drain.
4" IPS Spigot End Connectors
Polypropylene IPS spigot ends on the inlet and outlet replace the mechanical-joint hubs of the 3950A04 and the female NPT threads of the 3950A04T, matching plans that specify a 4" spigot connection.
Spigot Format Flow Control Included
A spigot x spigot x spigot external flow control device with integrated air intake ships with the unit, holding incoming flow to the 50 GPM rating and introducing the air the separation process needs.
52-Gallon Tall Tank
The 23.5"-tall body holds 52 gallons (197 L) of liquid — the largest volume in the 7–50 GPM range — giving incoming waste more retention time to separate.
122 lb Grease Capacity
Rated at 100 lb, the tank holds 122.07 lb (55.3 kg) of grease at 93.9% average efficiency per ASME A112.14.3, so it exceeds its nameplate rating between pump-outs.
220°F Polypropylene Body
High-impact engineered polypropylene that will not corrode, chip or peel is rated for a maximum service temperature of 220°F (104°C) continuous discharge, at just 60 lb empty.
Odor-Sealed Latching Cover
A recessed silicone seal keeps odors in and quick-access latches open the lid by hand; the cover exceeds CSA B481.0 Class L with a 600 lb minimum proof load and 300 lb service load.
Installation note: Leave about 21" of clearance above the 50 GPM tank so the baffles can be lifted out for cleaning, or semi-recess the unit. Vent the interceptor in accordance with local code and isolate it from the drainage system during any final drain or pressure test — never pressure test the tank. 3935AX6 riser extensions bring a below-grade tank up to grade by a maximum of 18". Installation by a licensed plumber is required.
Ideal Applications
The 50 GPM tank on a 4" line is sized for the heaviest fixture loads a point-of-use interceptor handles before moving to the Endura XL line.
3950A04S Specifications
| Model | Canplas Endura 3950A04S (product code 763673) |
|---|---|
| Type | Hydromechanical grease interceptor |
| Rated Flow | 50 GPM (3.2 L/s) |
| Rated Grease Capacity | 100 lb |
| Grease Capacity | 122.07 lb (55.3 kg) per ASME A112.14.3 |
| Average Efficiency | 93.9% per ASME A112.14.3 |
| Liquid Capacity | 52 gal (197 L) |
| Connection | 4" IPS spigot, polypropylene end connectors |
| Flow Control | Spigot format external flow control device (spigot x spigot x spigot) with integrated air intake, included |
| Dimensions | 31" L x 23.5" W x 23.5" H |
| Empty Weight | 60 lb (27.2 kg) |
| Shipping Weight | 70 lb |
| Material | High-impact polypropylene tank, lid and internal components |
| Max Service Temperature | 220°F (104°C) continuous discharge |
| Cover Rating | Exceeds CSA B481.0 Class L; 600 lb proof load, 300 lb service load |
| Maintenance Clearance | Approx. 21" above tank to remove baffles |
| Riser Extension | 3935AX6, up to 18" to grade |
| Standards | Efficiency rated to ASME A112.14.3; designed to PDI G-101; 3950A series accepted under NYC MEA 160-08-E |
| Warranty | Limited lifetime (registration within 90 days of purchase) |
Optional Accessories & Service Parts
These Endura parts fit the 50 GPM tank used by the 3950A04S.
Frequently Asked Questions
What is the difference between the Endura 3950A04S and the 3950A04?
Both use the same 50 GPM, 100 lb tank with 4-inch connections. The 3950A04 has no-hub mechanical joint connections, while the 3950A04S has IPS spigot polypropylene end connectors and ships with a spigot format flow control device. The 3950A04T version has female NPT threaded connections.
Is a flow control device included with the 3950A04S?
Yes. The 3950A04S is supplied with a spigot x spigot x spigot external flow control device with integrated air intake, which limits incoming flow to the 50 GPM rating.
How much grease does the 3950A04S hold?
It is rated at 100 lb and has a grease capacity of 122.07 lb (55.3 kg) at 93.9% average efficiency per ASME A112.14.3. Liquid capacity is 52 gallons.
How much clearance does the 3950A04S need for cleaning?
Plan for about 21 inches of clearance above the tank so the baffles can be removed for maintenance; if that is not practical, the tank can be semi-recessed.
Can the 3950A04S be installed below the floor?
Yes. It can be installed in-floor, on-floor or semi-recessed, and 3935AX6 riser extensions bring a below-grade tank up to grade by a maximum of 18 inches.
What are the dimensions and weight of the 3950A04S?
The interceptor measures 31 inches long, 23.5 inches wide and 23.5 inches high, weighs 60 lb empty and ships at about 70 lb.
| Brand | Canplas |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
| SKU | 3950A04S |
| Brand | Canplas |
| Weight | 70.00 lbs |
| Dimensions (HxWxD) | 23.50 x 31.00 x 23.50 inches |
| Height | 23.50 |
| Width | 31.00 |
| Depth | 23.50 |
|
|

