Dormont RG7536 ReliaGuard 3/4 Inch x 36 Inch Gas Connector Kit with Standard Snap Quick Disconnect, Valve & Restraining Cable
Dormont RG7536 — ReliaGuard 3/4" x 36" Gas Connector Kit with Standard Snap Quick Disconnect
The Dormont RG7536 is the shortest and highest-flowing of the 3/4" ReliaGuard Standard Snap kits, sized for caster-mounted gas equipment that sits close to its gas drop and needs maximum fuel. Its 3/4" I.D. x 36" ReliaGuard® moveable-grade connector — annealed, corrugated 304 stainless steel tubing under a multi-strand stainless braid and a gray PVC jacket — is rated for 218,000 BTU/hr of natural gas. One box delivers the complete hookup: a Standard Snap™ quick disconnect, a full port brass ball valve, a PVC-coated steel restraining cable with mounting hardware, and malleable iron 90° street elbows. Certified to ANSI Z21.69 / CSA 6.16 for moveable gas appliances, it lets kitchen staff unhook a fryer or range, clean behind it, and reconnect without tools.
Key Features of the RG7536
The RG7536 pairs the 3/4" ReliaGuard hose with a matched shutoff, quick disconnect, and restraint, so every piece of the connection is certified to work together on moveable commercial cooking equipment.
218,000 BTU/hr Flow Capacity
At 36" long, this 3/4" I.D. connector carries 218,000 BTU/hr of natural gas (0.64 specific gravity at a 0.5" WC pressure drop) — more than the 48" RG7548 or 60" RG7560 in the same size.
304 Stainless Steel, Braided & PVC-Coated
Annealed, corrugated 304 stainless tubing is reinforced with a multi-strand stainless steel wire braid and sealed in a gray PVC coating that melts at 350°F (177°C) and will not hold a flame.
Standard Snap Quick Disconnect
A brass-body Standard Snap™ quick disconnect with an aluminum collar separates the appliance from the gas supply for cleaning or service and snaps back on without tools.
Full Port Brass Ball Valve
The included full port, brass-body gas valve provides a manual shutoff ahead of the connector without the flow restriction of a reduced-port valve on a 3/4" line.
Restraining Cable Included
A PVC-coated, multi-strand steel restraining cable with mounting hardware anchors the appliance so the 36" hose never carries the load when caster-mounted equipment is moved.
360° Rotational End Fittings
Carbon steel end fittings with a zinc trivalent chromate finish rotate a full 360° at both ends, reducing twist on the hose every time the appliance is rolled out and back.
Installation note: The RG7536 is for indoor use only, must not be used in temperatures below 32°F (0°C), and has a maximum operating pressure of 1/2 psi. A restraining device is required on all moveable gas equipment, so install the supplied cable with the connector. Make sure 36" leaves enough slack to pull the appliance out for cleaning, confirm its BTU input is within the 218,000 BTU/hr rating, and have the kit installed by a qualified gas installer per the Dormont instructions and ANSI Z223.1 / NFPA 54.
Ideal Applications
The RG7536 suits caster-mounted gas equipment installed close to its gas outlet, where a shorter run keeps flow high and the hose out from under foot.
RG7536 Specifications
| Model | Dormont RG7536 |
|---|---|
| Series | ReliaGuard® with Standard Snap™ Quick-Disconnect Kit |
| Inside Diameter | 3/4" |
| Length | 36" (914 mm) |
| Flow Capacity | 218,000 BTU/hr natural gas (0.64 SG @ 0.5" WC pressure drop) |
| Tubing | Annealed, corrugated 304 stainless steel |
| Braiding | Multi-strand stainless steel wire |
| Coating | Gray PVC; melts at 350°F (177°C), will not hold a flame |
| End Fittings | Carbon steel, zinc trivalent chromate; 360° rotational at both ends |
| Quick Disconnect | Standard Snap™, brass body, aluminum collar |
| Valve | Full port, brass body |
| Elbows | 90° street elbows, malleable iron |
| Restraining Device | PVC-coated steel multi-strand cable with mounting hardware |
| Max Operating Pressure | 1/2 psi |
| Use | Indoor only; not below 32°F (0°C) |
| Certifications | ANSI Z21.69 / CSA 6.16; ANSI Z21.41 / CSA 6.9; ANSI Z21.15 / CSA 9.1; meets ANSI Z223.1 / NFPA 54 |
| Warranty | 5 years (commercial gas connector, original appliance) |
Frequently Asked Questions
What comes in the Dormont RG7536 kit?
The kit includes a 3/4" x 36" ReliaGuard gas hose, a Standard Snap quick disconnect, a full port brass ball valve, a PVC-coated steel restraining cable with mounting hardware, and malleable iron 90-degree street elbows.
How many BTUs can the RG7536 supply?
The 3/4" x 36" ReliaGuard connector is rated at 218,000 BTU/hr of natural gas at 0.64 specific gravity with a 0.5" WC pressure drop. The longer 48" RG7548 is rated at 180,000 BTU/hr and the 60" RG7560 at 158,000 BTU/hr.
Is 36 inches long enough for my appliance?
Choose the length that lets the appliance roll out far enough for cleaning without stretching the hose; the restraining cable should stop the appliance before the connector is pulled tight. If 36" is too short, the RG7548 (48") and RG7560 (60") use the same components.
Can the RG7536 be installed outdoors?
No. Dormont rates the ReliaGuard kit for indoor use only, not for temperatures below 32°F (0°C), with a maximum operating pressure of 1/2 psi.
What certifications does the RG7536 carry?
It is certified to ANSI Z21.69 / CSA 6.16 for moveable gas appliance connectors, ANSI Z21.41 / CSA 6.9 for quick-disconnect devices, and ANSI Z21.15 / CSA 9.1 for manual gas valves, and it meets ANSI Z223.1 / NFPA 54.
What warranty comes with the RG7536?
Dormont guarantees its commercial gas connectors for 5 years on the original appliance to which the connector is installed.
| Brand | Dormont Manufacturing |
-
Price Match Request
Find better pricing? Just send it to us and ask for a quote! -
Financing Available, Flexible payment plans to fit your budget. Click here to explore your options
-
Guaranteed Safe Checkout
![[Price Match Guarantee] Price Match Guarantee](/web/image/dr.website.content/5/image/%5BPrice%20Match%20Guarantee%5D%20Price%20Match%20Guarantee?unique=3dc2115){kind=small}
| SKU | RG7536 |
| Brand | Dormont Manufacturing |
|
Resources
