Blue Air BGM47SLB-HC 54" Two-Door Sliding Glass Merchandiser Refrigerator, Black, 41 cu. ft.

Blue Air rates the two-section cabinet at 41 cu. ft. behind two sliding glass doors, with eight epoxy coated wire shelves — four in each compartment. Every shelf is height-adjustable, so one bay can be pitched tight for cans while the other is opened up for 2-liter bottles or packaged grab-and-go, and extra shelves are available if you want a denser planogram.

The cabinet is 54-3/8" wide and 30-1/8" deep, and because both doors slide along the face instead of swinging, you do not need to add any clearance in front for a door arc. It does stand 84" tall, which is taller than a standard 80" door frame, so check the delivery path and the ceiling or soffit height over the final location before it ships.

The BGM47SLB-HC is the black painted steel exterior and trim version of Blue Air's 41 cu. ft. two-door sliding merchandiser; the mechanical package, 41 cu. ft. capacity, eight shelves and 1/2 HP R-290 system are the same on the white cabinet. Choose black when you want the fixture to disappear into a dark store fit-out or to frame the lit interior with higher contrast, and white when it needs to blend with a bright grocery or cafeteria wall.

No. Blue Air approves the BGM47SLB-HC for pre-packaged foods only, meaning shrink-wrapped or sealed items such as canned and bottled drinks, packaged sandwiches, salads and snacks. The unit runs as a refrigerator between 33°F and 39°F under digital control and conforms to NSF/ANSI 7, but open or unpackaged product is not permitted in the cabinet.

It runs on a standard 115V/60Hz single-phase circuit and draws 7.0 amps to drive its 1/2 HP self-contained system. The unit terminates in a NEMA 5-15P plug on a 9.8 ft (3 m) flexible three-wire cord with a molded plug, so it plugs into an ordinary grounded receptacle with no hard wiring at the fixture.

The compressor sits in a bottom-mounted, front sliding refrigeration unit, so a technician pulls the deck forward from the front of the cabinet and works on it without moving the loaded merchandiser off the wall. A bottom-mounted condensation pan is designed to prevent water overflow while improving ventilation, and the electrodeposition coated evaporator maintains its heat transfer rate and resists corrosion over the life of the unit.